Choosing an internal or external network adapter

When you choose the hardware to buy for your home or small office network, you must decide whether to install network adapters inside your computer or plug them into the USB port on your computer.

External network adapters
The simplest, easiest way to set up your home or small office network is to use external USB network adapters. These adapters plug into a USB port on your computer. External network adapters are available for Ethernet, home phoneline network adapter (HPNA), and wireless networks.

When you connect the network adapter to the USB port and the corresponding hub (Ethernet network hub or phone jack for HPNA), your network is ready to use. With a wireless network, you only need to plug the wireless network adapter into the USB port.

Internal network adapters
Internal network adapters are installed inside your computer into a PCI slot. To install an internal network adapter, you must open up your computer. You can have other devices, such as modems or other network adapters, also installed in your computer.

If you already have an internal network adapter installed, and you are installing a second network adapter, we recommend that you have a qualified technician install the new network adapter. The technician can troubleshoot and resolve any problems that might occur when the network adapter is installed.

Note

To find hardware that is supported by Windows operating systems, visit the Windows Catalog on the Microsoft Web site.


Network adapters overview

A network adapter is a device that connects your computer to a network.

External network adapters do not require opening up your computer or installing special network cables in your home. You can plug an external network adapter into a USB port on your computer. External network adapters are the fastest and easiest way to set up your home network. They are available for Ethernet, home phoneline network adapter (HPNA), or wireless technology.

Internal network adapters are installed in an expansion slot inside your computer. Most computers come with several PCI expansion slots.

The following table describes the different types of network adapters available today. External and internal adapters are available for each type.

Hardware requirements overview

There are four types of hardware required to set up a home or small office network:

Network adapter: Network adapters (also called network cards) connect your computers to the network and enable them to communicate with each other. Network adapters can be connected to the USB port on your computer or installed inside your computer in an available PCI expansion slot.
Network hubs and cables: A hub connects communication lines at a central location. A hub is typically used for connecting two or more computers to an Ethernet network. A hub is not required if you connect your computers through your phone lines using a home phoneline network adapter (HPNA), or if you use a wireless adapter. You can also use IEEE 1394 network adapters.
Modem: A modem can be a 28.8 or 56 kilobits per second (Kbps) modem, a wireless modem, an Integrated Services Digital Network (ISDN), a Digital Subscriber Line (DSL), or a cable modem.
The computers on your network must meet the following minimum requirements:

If you use Internet Connection Sharing (ICS), the computer sharing its Internet connection (the ICS host computer) should be running Windows XP Home Edition or Windows XP Professional.
The Network Setup Wizard can only be run on computers running Windows 98, Windows 98 Second Edition, Windows Millennium Edition, Windows XP Home Edition, Windows XP Professional, or Microsoft Windows XP Service Pack 2 (SP2).
When you have all the required hardware installed in each of your computers, you can run the Network Setup Wizard.

Notes

To start the Network Setup Wizard, click Start, click Control Panel, click Network and Internet Connections, and then click Network Setup Wizard.
Before running the Network Setup Wizard, create an Internet connection on the computer that is attached to a residential gateway (or the ICS host computer, if you are using ICS). For more information about creating an Internet connection using the New Connection Wizard see, To make an Internet connection.
External network adapters are the easiest to install because you plug them into a USB port on your computer instead of opening up your computer. For more information about installation, read the documentation that came with your hardware.
To find hardware that is supported by Windows operating systems, visit the Windows Catalog on the Microsoft Web site.


Setting up a wireless network

You can use the Wireless Network Setup Wizard to set up a wireless network in your home or small office. Setting up a wireless network is a two-part process:

Install the appropriate hardware on each computer or device. For example, install a wireless network adapter on any computer or device that does not have one.
Run the Wireless Network Setup Wizard.
The Wireless Network Setup Wizard guides you through setting up your network. If you have a USB flash drive, the wizard can save your network settings to the drive. Then you simply insert the USB drive into the access point, and then into each computer or device that you want to add to the network.

If you don't have a USB flash drive, the Wireless Network Setup Wizard can still help you set up a wireless network. And even if your computer does not have a wireless network adapter, you can still use the Wireless Network Setup Wizard to configure other computers that do have wireless adapters.

The Wireless Network Setup Wizard is only available in Microsoft Windows XP Service Pack 2 (SP2). Some access points do not support this configuration method; those access points must be configured manually.

After running the Wireless Network Setup Wizard, you can turn on File and Printer Sharing on your new wireless network by running the Network Setup Wizard on each computer.


Steps for creating a home or small office network


The checklist below lists the steps, in the order they should be completed, for setting up a home or small office network using the Network Setup Wizard. If a step does not apply to you, go on to the next step.

Before you start to set up your network, print this checklist so that you can refer to it. Also, read the Home and small office networking overview.

Step Reference
Sketch out your network: draw a diagram of your home or office, showing the location of each computer and printer. Or, you can create a table that lists the hardware on each computer. Sample table for determining hardware needs
Next to each computer, note the hardware, such as modems and network adapters, installed on each computer. Modems overview;
Network adapters overview
Choose the computer on which you will set up the residential gateway (or the computer that will be your Internet Connection Sharing (ICS) host computer). We recommend that this computer be running Windows XP Home Edition, Windows XP Professional or Microsoft Windows XP Service Pack 2 (SP2). Choosing your Internet Connection Sharing host computer;
Network configurations overview
Determine the type of network adapters you need for your network: Ethernet, home phoneline network adapter (HPNA), wireless, or IEEE 1394. Network adapters overview;
Choosing an internal or external network adapter
Make a list of hardware that you need to buy. This includes modems, network adapters, hubs, and cables. Buying the right hardware
Buy the hardware. To find hardware that is supported by Windows operating systems, visit the Windows Catalog on the Microsoft Web site.
Install the correct network adapters and modems on each computer. See the manufacturers’ documentation.
If you are setting up a wireless network, run the Wireless Network Setup Wizard. Setting up a wireless network
Physically connect the computers together. Plug the cables into hubs, phone jacks, and the computer. Connect your computers together
Turn on all computers and printers.
Make sure the computer attached to the residential gateway (or the ICS host computer) has an active Internet connection. To establish your Internet connection, run the New Connection Wizard. Internet Connection Sharing;
To make an Internet connection
Run the Windows XP Professional Network Setup Wizard on the computer attached to the residential gateway (or the ICS host computer). Network Setup Wizard overview
Run the Network Setup Wizard on the other computers on your network. Configure other computers on your network using a floppy disk

Notes

To start the Network Setup Wizard, click Start, click Control Panel, click Network and Internet Connections, and then click Network Setup Wizard.
If you plan to use Internet Connection Sharing (ICS), and another computer using an earlier version of Windows has ICS enabled, disable ICS on this computer before enabling ICS on Windows XP Home Edition or Windows XP Professional. For more information, see Change the Internet Connection Sharing host computer.
The Network Setup Wizard is only supported on computers using Windows 98, Windows 98 Second Edition, Windows Millennium Edition, Windows XP Home Edition, Windows XP Professional, or Microsoft Windows XP Service Pack 2 (SP2).
Windows Millennium Edition has a Home Networking Wizard. When joining this computer to the Windows network, make sure you run the Network Setup Wizard on the computer running Windows Millennium Edition

Home and small office networking tools overview

Network Setup Wizard
The Network Setup Wizard makes setting up a home or small office network easier than before. After the network hardware is installed and your computers are connected together, run the Network Setup Wizard. If you have an Internet Connection Sharing (ICS) host computer, run the wizard on the host computer first, and then run the wizard on the rest of the computers. (These are called the client computers.) After you answer some basic questions, the wizard configures the computers to operate correctly on the network, and enables File and Printer Sharing if it is appropriate to do so.

Wireless Network Setup Wizard
You can use the Wireless Network Setup Wizard to set up a wireless network. You must first install the appropriate hardware on each computer or device (for example, install a wireless network adapter on any computer or device that does not have one). Then you can run the Wireless Network Setup Wizard.

For more information about the Wireless Network Setup Wizard, see Setting up a wireless network.

New Connection Wizard
With the New Connection Wizard, you can easily create Internet, dial-up, virtual private networking (VPN), incoming, and direct connections.

The New Connection Wizard replaces the Internet Connection Wizard found in earlier versions of Windows.

Local area connections are automatically created when a network adapter is installed in the computer. After installing the network adapter, you can configure it to access the Internet or communicate with your home or small office network. For more information, see To make a local area connection.

Residential gateway
A residential gateway is a device that connects multiple computers to the Internet using a single Internet connection. The client computers rely on the residential gateway to provide Internet access. Security is enhanced when you use this configuration because only the residential gateway is visible to the Internet. Any communication from client computers to the Internet must pass through the gateway, a process that keeps the addresses of client computers hidden from anyone on the Internet. Client computers are protected because they cannot be seen from outside the network.

The residential gateway also manages network addressing. The gateway assigns itself a permanent address and provides Dynamic Host Configuration Protocol (DHCP) to client computers, assigning a unique address to each client, which enables the client computers to communicate with other computers on the network.

Windows Firewall
Microsoft Windows XP Service Pack 2 (SP2) offers small networks that are connected to the Internet the added security of firewall protection. Windows Firewall is enabled by default to help protect all Internet and network connections. You can also download and install a firewall of your own choosing.

Network Bridge
Network Bridge simplifies the setup and configuration of small networks with mixed network media types, such as Ethernet, home phoneline network adapter (HPNA), wireless, and IEEE 1394 devices. Each media type creates its own network segment. You can create a single subnet for the entire home or small office network by using Network Bridge across mixed media segments.

When the Network Setup Wizard is run, it detects if there are multiple network adapters installed in the computer. It then asks if you want to create the Network Bridge. Network adapters that are connected to the Internet, such as an Ethernet adapter connected to an external DSL or cable modem, should not be added to the Network Bridge.

Discovery and Control
Discovery and Control is a UPnP technology that enables client computers to remotely access and configure an ICS host or an Internet gateway device. For more information, see Using Internet Connection Sharing with Internet Gateway Device Discovery and Control and Using Internet Gateway Device Discovery and Control.

Note

To start the Network Setup Wizard, click Start, click Control Panel, click Network and Internet Connections, and then click Network Setup Wizard.

Home or small office networking overview

If you have more than one computer, or other hardware devices such as printers, scanners, or cameras, you can use a network to share files, folders, and your Internet connection. For example, if you are working online, someone else can be surfing the Internet from another computer at the same time. If you have multiple computers and one or more other hardware devices such as printers, scanners, or cameras, you can also share access to those devices from all computers.

There are several ways to connect computers or create a network. For a home or small office, the most common model is peer-to-peer networking.

In a peer-to-peer network, also called a workgroup, computers directly communicate with each other and do not require a server to manage network resources. A peer-to-peer network is most appropriate when fewer than ten computers are located in the same general area. The computers in a workgroup are considered peers because they are all equal and share resources among each other. Each user decides which data on his or her computer will be shared with the network. By sharing common resources, users can print from a single printer, access information in shared folders, and work on a single file without transferring it to a floppy disk.

A home or small office network is like a telephone system. On a network, each computer has a network adapter that acts like a phone handset: just as you use a handset for talking and listening, the computer uses the network device to send and receive information to and from other computers on the network. With home or small office networking, you can:

* Use one computer to secure your entire network and protect your Internet connection.
* Share one Internet connection with all of the computers on the network.
* Work on files stored on any computer on the network.
* Share printers with all of the computers on the network.
* Play multiplayer games.

Setting up your network is a two-part process:

1. Install and configure the appropriate hardware on each computer. Some hardware might require additional configuration to get connected to the Internet. For more information, click Related Topics.
2. Run the Network Setup Wizard on each computer in your home or small office network.

The Network Setup Wizard guides you through the steps needed to set up your network.

You can use a residential gateway device, through which all of your computers connect to the Internet. Or you can set up one computer to communicate to the Internet using Internet Connection Sharing (ICS). All computers in your network can communicate with the Internet through a single connection at the same time. All members of your family can surf the Web, check their e-mail, and play Internet games through a single connection.

Notes

* To start the Network Setup Wizard, click Start, click Control Panel, click Network and Internet Connections, and then click Network Setup Wizard.
* The Network Setup Wizard is only supported on computers running Windows 98, Windows 98 Second Edition, Windows Millennium Edition, Windows XP Home Edition, and Windows XP Professional.
* Your ISP might charge you for having multiple Internet connections. Check with your Internet service provider for details.